High Speed Tubular Wire-Stranding Machine for Multiplied Copper Wire
1. Application
The machine is mainly used for bare copper, bare aluminum stranded wire, also used for multi-core insulated wire stranded.The base adopt 200 integrally welded, the upper and lower planes are processed as a whole part by a large planer, and the tubular is integrally installed on the base, making it easy to install.
2. Feature
2.1 The tubular cage is annealed, which will reduce the internal stress and increase service life.
2.2 Different transmission: separate motor transmission, ground shaft transmission .
2.3 Bobbins locked with mechanical pintles: one is movable and one is fixed, or Bobbin is fasten on the axis by latch.
2.4 The wire guiding roller in tubular is made of bearing steel, which is not easy to wear.
3.Technical parameters
Model (Tubular Stranding Machine)
| JGG-400 | JGG-500 | JGG-630 |
| Diameter of single wire | Copper
| φ1.2-2.6 mm | φ1.4-4 mm | φ2-7 mm |
Aluminum
| φ1.8-2.6 mm | φ1.8-4 mm | φ2-7 mm |
Maximum stranded conductor OD
| φ7 mm | φ10 mm | φ12 mm |
| Stranding Pitch | 6 Bobbin Stranding Cage | 37-281 mm | 44-338 mm | 82-620 mm |
| 12 Bobbin Stranding Cage | 37-281 mm | 44-338 mm | 82-620 mm |
| 18 Bobbin Stranding Cage | 44-334 mm | 44-338 mm | 82-620 mm |
| Rotating Speed | 6 Bobbin Stranding Cage | 600 r/min | 600 r/min | 400 r/min |
| 12 Bobbin Stranding Cage | 600 r/min | 500 r/min | 300 r/min |
| 18 Bobbin Stranding Cage | 450 r/min | 400 r/min | 230 r/min |
| Capstan | Capstan Wheel Diameter | φ600 mm | φ800 mm | φ1000 mm |
Maximum Haul-off Force
| 3T | 5T | 5T |
Motor Power
| 22 KW | 30 KW | 37 KW |
Bobbin Size
| 400 mm | 500 mm | 630 mm |
Center Payoff Bobbin
| 400 mm | 500 mm | 630 mm |
Take-up Bobbin
| 1250 mm | 1600 mm | 2000 mm |
4. Photo
5. Packing photo
6. Our factory and introduction
Hejian Baohong Electrical Machinery Co., Ltd. was established in 2006. Our company is located in the Economic Development Zone of Hejian City, Hebei Province, has been the largest professional manufacturer for wire stranding machine and laying-up machine in North China.
Since 2006, relying on the care and support of our customers, Baohong Machinery has been devoted to the research and development of wire stranding machine and laying-up machine and has made great improvement. Now we have become the only one factory who can develop the production of the JLK rigid stranding machine series to be an assembly line processing in China, and we also have independently developed the JGB Bow skip stranding lines, the CGB Bow skip type cabling lines and the CLY High speed Cradle type Laying-up lines.
Now, Hejian Baohong Electrical Machinery Co., Ltd., covers an area of 10000 square meters, production workshop 8000 square meters. Our company has 60 employees, including 10 R & D staffs. Annual output value is over 10 million dollars at present,and has developed into one of the most important Stranding Machine Manufacturer in China.
Product Tags:
|
|
High Speed Tubular Wire Stranding Machine For Multiplied Copper Wire Images
|
